|
|
|
23806-01_AAxial angular contact ball bearing, steel, double row with... |
go back |
|
Item description/product images |
|
|
DescriptionMaterial:Steel housing.
Nitrile rubber seal.Version:Ground edges.Technical data:All bearings are supplied ready for mounting with lubricating grease type KE2P-35 acc. to DIN 51825.
Housing and shaft tolerances correspond to roundness tolerance class IT2 and perpendicularity tolerance class IT4.Application:For thread drive bearing.Temperature range:-30 °C to +120 °C.Assembly:Precision slotted nuts must be used for mounting the threaded spindles.
To compensate for any material settling during assembly, tighten the slotted nuts using 2x tightening torque, loosen slightly and then tighten using the prescribed tightening torque.
Tighten fastening screws crosswise up to max. 70% of the yield point.Special features: DownloadHere is all the information as a PDF datasheet:
Are you looking for CAD data? These can be found directly in the product table.
|
| Order No. | Abbreviation | Version 1 | Form | B | B1 | B2 | D
| D1 | D2 | D3 | D4 | D5 | R | R1 | α | β | M | Tightening torque,
precision locknut
Nm | Speed limit
rpm | CAD | Acc. | Price | Order |
|---|
| 23806-01-101205525 | 1255-2RS | double-row | A | 25 -0,25 | 3 | 17 | 12-0,005 | 55-0,01 | 25 | - | 6,6 | 42 | 0,3 | 0,6 | 60° | 120° | M6 | 8 | 3800 |  | | on request | |
Order No.
| Abbreviation | Static
load rating
N | Dynamic
load rating
N | Axial
rigidity
N/μm | Tilt rigidity
Nm/mrad | Bearing friction torque
Nm
| Moment of
inertia
kg.cm² | Circular runout
μm | Radial
bearing clearance | Hole
tolerance
μm | OD
tolerance
μm | Width
tolerance
μm | CAD | Acc. | Price | Order |
|---|
| 23806-01-101205525 | 1255-2RS | 24700 | 16900 | 375 | 50 | 0,16 | 0,068 | 2,0 | pre-tensioned | 0-5 | 0-10 | 0-250 | | | on request | |
Other items in this category |
|
|
