|
|
|
03089 inchIndexing plungers with extended indexing pin, inch |
go back |
|
|
DescriptionMaterial:Steel version
Indexing pin hardened:
grade 5.8.
Stainless steel version
Indexing pin hardened:
Threaded sleeve 1.4305.
Indexing pin 1.4034.
Indexing pin not hardened:
Threaded sleeve 1.4305.
Indexing pin 1.4305.
Mushroom knob black-grey thermoplastic. Version:Steel version:
Indexing pin hardened, ground, black oxidised.
Stainless steel version:
Indexing pin hardened, ground and bright.
Indexing pin not hardened, ground and bright.Note:Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been manually disengaged.On request:Special versions.Accessory:Spacer rings 03089.
fastening sets for thin-walled parts 03094-10.Drawing reference:Form A: non-lockout type, without locknut
Form B: non-lockout type, with locknut
Form C: lockout type, without locknut
Form D: lockout type, with locknut DownloadHere is all the information as a PDF datasheet:
Are you looking for CAD data? These can be found directly in the product table.
|
Drawings (total overview) |
Order No.
steel
hardened | Order No.
stainless steel
hardened | Order No.
stainless steel
not hardened | Form | D | D1 | D2 | L | L1 | L2 | L3 | Travel
S | SW1 | Fx30° | Spring force
initial pressure
F1 approx. N | Spring force
final pressure
F2 approx. N | Filter |
|---|
| 03089-21903AJ | 03089-201903AJ | 03089-211903AJ | A | 3 | 1/4-28 | 14 | 33 | 12 | 5 | 10 | 5 | 8 | 0,8 | 4,5 | 12 |  | | 03089-21004AK | 03089-201004AK | 03089-211004AK | A | 4 | 5/16-24 | 18 | 40,5 | 15 | 6 | 13 | 6 | 10 | 1 | 6 | 15 | | | 03089-21105AL | 03089-201105AL | 03089-211105AL | A | 5 | 3/8-24 | 21 | 46,5 | 17 | 7 | 15 | 8 | 13 | 1,3 | 5 | 16 | | | 03089-21206A5 | 03089-201206A5 | 03089-211206A5 | A | 6 | 1/2-13 | 25 | 55 | 20 | 8 | 17 | 9 | 14 | 1,8 | 6 | 18 | | | 03089-21308A6 | 03089-201308A6 | 03089-211308A6 | A | 8 | 5/8-11 | 33 | 72 | 26 | 10 | 23 | 12 | 19 | 2,3 | 15 | 45 | | | 03089-21410A7 | 03089-201410A7 | 03089-211410A7 | A | 10 | 3/4-10 | 33 | 79 | 28 | 12 | 25 | 15 | 22 | 2,8 | 15 | 43 | | | 03089-21412AO | 03089-201412AO | 03089-211412AO | A | 12 | 3/4-16 | 33 | 84 | 28 | 14 | 25 | 18 | 22 | 2,8 | 15 | 51 | | | 03089-21516A8 | 03089-201516A8 | 03089-211516A8 | A | 16 | 1-8 | 40 | 104 | 32 | 18 | 28 | 24 | 27 | 3,2 | 20 | 50 | |
|
Order No.
steel
hardened | Order No.
stainless steel
hardened | Order No.
stainless steel
not hardened | Form | D | D1 | D2 | L | L1 | L2 | L3 | Travel
S | SW1 | SW2 | Fx30° | Spring force
initial pressure
F1 approx. N | Spring force
final pressure
F2 approx. N | Filter |
|---|
| 03089-22903AJ | 03089-202903AJ | 03089-212903AJ | B | 3 | 1/4-28 | 14 | 33 | 12 | 5 | 10 | 5 | 8 | 7/16 | 0,8 | 4,5 | 12 | | | 03089-22004AK | 03089-202004AK | 03089-212004AK | B | 4 | 5/16-24 | 18 | 40,5 | 15 | 6 | 13 | 6 | 10 | 1/2 | 1 | 6 | 15 | | | 03089-22105AL | 03089-202105AL | 03089-212105AL | B | 5 | 3/8-24 | 21 | 46,5 | 17 | 7 | 15 | 8 | 13 | 9/16 | 1,3 | 5 | 16 | | | 03089-22206A5 | 03089-202206A5 | 03089-212206A5 | B | 6 | 1/2-13 | 25 | 55 | 20 | 8 | 17 | 9 | 14 | 3/4 | 1,8 | 6 | 18 | | | 03089-22308A6 | 03089-202308A6 | 03089-212308A6 | B | 8 | 5/8-11 | 33 | 72 | 26 | 10 | 23 | 12 | 19 | 15/16 | 2,3 | 15 | 45 | | | 03089-22410A7 | 03089-202410A7 | 03089-212410A7 | B | 10 | 3/4-10 | 33 | 79 | 28 | 12 | 25 | 15 | 22 | 1-1/8 | 2,8 | 15 | 43 | | | 03089-22412AO | 03089-202412AO | 03089-212412AO | B | 12 | 3/4-16 | 33 | 84 | 28 | 14 | 25 | 18 | 22 | 1-1/8 | 2,8 | 15 | 51 | | | 03089-22516A8 | 03089-202516A8 | 03089-212516A8 | B | 16 | 1-8 | 40 | 104 | 32 | 18 | 28 | 24 | 27 | 1-1/2 | 3,2 | 20 | 50 | |
|
Other items in this category |
|
|
