Quarter-turn locks with cam tongue

go back

Products
- Product overview
  - Flexible standard component system
    - Toggle clamps Pneumatic clamps Accessories for clamps Latches Quarter-turn locks
      - Quarter-turn locks
        Quarter-turn locks with cam tongue

Item description/product images

DescriptionMaterial:Housing, actuator and tongue die-cast zinc.
Nut steel.
Flat seal rubber.Version:Housing and actuator trivalent passivated.
Tongue blank.
Nut electro zinc-plated.Note:Quarter-turn locks with stepped cam are primarily used for doors and housings that require a higher pressure force on the seal. For right or left use. The locking process is always clockwise. The compression gap can be increased incrementally up to 9.5 mm at a maximum turning angle of 270° by turning the actuator clockwise.

Protected from water and dust to IP65.Accessory:Lock key 05586Drawing reference:

Actuation:
a) square 7 mm
b) double lug 3 mm
c) double lug 5 mm

1) O-ring
2) Adapter

Special features:

DownloadHere is all the information as a PDF datasheet:

Are you looking for CAD data? These can be found directly in the product table.

Datasheet 05576 Quarter-turn locks with cam tongue

368 kB

Drawings

Item selection/filter

Order No.	Actuation	A	L	S max.	Price
05576-17301	square 7 mm	30 -9,5	30	20	on request
05576-17401	square 7 mm	40 -9,5	40	30	on request
05576-17501	square 7 mm	50 -9,5	50	40	on request
05576-17601	square 7 mm	60 -9,5	60	50	on request
05576-43301	double lug 3 mm	30 -9,5	30	20	on request
05576-43401	double lug 3 mm	40 -9,5	40	30	on request
05576-43501	double lug 3 mm	50 -9,5	50	40	on request
05576-43601	double lug 3 mm	60 -9,5	60	50	on request
05576-45301	double lug 5 mm	30 -9,5	30	20	on request
05576-45401	double lug 5 mm	40 -9,5	40	30	on request
05576-45501	double lug 5 mm	50 -9,5	50	40	on request
05576-45601	double lug 5 mm	60 -9,5	60	50	on request