Product overview positioning Flexible standard component system assembling Assembly system moving Systems / components for machine and plant construction measuring Measuring and testing components clamping Clamping technology controlling Electromechanics transporting Material handling and transport technoshop norelem inch Inch parts

Productfinder

Drill bushes

go back

Products
- Product overview
  - Flexible standard component system
    - Jig elements Drill bushes
      - Drill bushes
        Drill bushes

Online configurator

Product finderDrill bushes

You can find your desired product quickly and specifically with the product finder.
Select the desired parameters step for step from the red marked dropdown menu.

You can then place the results directly into the shopping cart and order them.

DownloadHere is all the information as a PDF datasheet:

Are you looking for CAD data? These can be found directly in the product table.

Datasheet 08900 Drill bushes cylindrical DIN 179

365 kB

Datasheet 08910 Drill bushes flanged DIN 172

377 kB

Datasheet 08920 Drill bushes push-inDIN 173

307 kB

Datasheet 08920 Drill bushes push-inDIN 173-1

556 kB

Select the desired parameter

Drawings

DIN 172 - Flanged drill bushes

The flange on these drill bushes prevents the bush being pressed fully into the recieving bore. DIN 172 flanged drill bushes sit a little bit proud of the jig plates top face.

Form A:
The bore is rounded on one end

Form B:
The bore is rounded both ends

DIN 173 - Replaceable drill bush

In contrast to DIN 179 drill bushes, DIN 173 bushes can be quickly removed and exchanged enabling different diameter bushes to be used in the same jig. When used together with DIN 173 clamping bushes, DIN 173 panhead screws and DIN 912 cap screws, sure results are guaranteed.

Form A:
No insert chamfer – These drill bushes are used predominantly to guide drills in drilling jigs as they enable a rapid change for different drill diameters.

Form K:
Used as quick-change bushes for RH cutting tools.
Form L:
These belong to the exchangeable types of bushes.

DIN 173 - bush clamps

Bush clamps are used to secure replaceable drill bushes. They lock the drill bush in place and ensure safety during machine operation.

Note: The 1.0711 steel bush clamps are supplied with a steel DIN 912 cap screw eliminating the need to separately acquire the screw required to fasten the bush in place.

DIN 179 - Cylindrical drill bushes

The DIN 179 drill bushes are parallel cylindrical drill bushes. They are machined from a special low-carbon steel and then case hardened and ground.

Cylindrical drill bushes are also often used as positioning bushes. The bushes can be pressed in flush to the work surface. DIN 179 drill bushes can be combined with DIN 173 replaceable drill bushes.

Form A:
The bore is rounded on one end

Form B:
The bore is rounded both ends

Shopping cart

Number of items:

Amount:

0.00 €

欢迎扫描二维码
咨询诺瑞朗官方客服微信

Tel. +49 71 45/206-44 to 45 · Fax +49 71 45/206-83