Clamping levers, die-cast zinc with external thread and clamping...

go back

Products
- Product overview
  - Flexible standard component system
    - Operating parts
      - Clamping and tension levers
        Clamping levers, die-cast zinc with external thread and clamping force intensifier, threaded insert stainless steel

Item description/product images

DescriptionProduct description:By using clamping levers with integrated clamping force intensifier, the clamping force can be increased by up to 75% compared to standard clamping levers.

Furthermore, this product can also be used by persons with limited hand strength (e.g. in rehabilitation) to achieve comparable clamping forces with less effort. Less effort is also needed to loosen the clamping lever.

The increase in clamping force is achieved by the integral needle roller thrust bearing, which generates very low surface friction on a rigid contact surface during clamping. The hardened thrust washers are designed for high clamping forces and the bearing with its high load rating guarantees a long service life.

The clamped component is permanently protected by the large, stationary contact surface. A washer is no longer required.

Due to the modular construction many special designs are available.Material:

Handle die-cast zinc DIN EN 12844.
Steel parts stainless steel 1.4305.

Version:Handle powder-coated.
Steel parts bright.
Axial needle bearing with hardened and ground thrust washer.Note:Standard colours are:
orange RAL 2004, ruby red RAL 3003, silver metallic.Type of operation:In the default position, the handle is engaged with the threaded insert through a toothed ring. By lifting the handle, it can be repositioned and re-engaged in the toothed ring by spring force.Application:Machine, equipment and plant construction, rehabilitation sector.Assembly:The screw-in depth must be at least 2 x the thread diameter and the thread should be lubricated lightly during installation.Advantages:Significant increase of the clamping force with the same tightening torque.
High quality axial needle bearing with high load rating and long service life.
The component surface is protected by the stationary lower ring.On request:Other colours and thread lengths.Drawing reference:

1) flat point DIN EN ISO 4753

Special features:

DownloadHere is all the information as a PDF datasheet:

Are you looking for CAD data? These can be found directly in the product table.

Datasheet 06461-10 Clamping levers, die-cast zinc with external thread and clamping force intensifier, threaded insert stainless steel

338 kB

Drawings

Item selection/filter

Order No.	Main colour	Surface finish body	Size	X	D2	H	H2	H3	H4	A	A1	B	L	Price
06461-10-2082X10	orange RAL 2004	plastic-coated	2	M8	25	38,5	27,7	52,6	55,6	65	77,5	10	10	on request
06461-10-2082X20	orange RAL 2004	plastic-coated	2	M8	25	38,5	27,7	52,6	55,6	65	77,5	10	20	on request
06461-10-2082X30	orange RAL 2004	plastic-coated	2	M8	25	38,5	27,7	52,6	55,6	65	77,5	10	30	on request
06461-10-2082X40	orange RAL 2004	plastic-coated	2	M8	25	38,5	27,7	52,6	55,6	65	77,5	10	40	on request
06461-10-3102X15	orange RAL 2004	plastic-coated	3	M10	30	47	33,9	64,4	68,6	80	95	11,2	15	on request
06461-10-3102X30	orange RAL 2004	plastic-coated	3	M10	30	47	33,9	64,4	68,6	80	95	11,2	30	on request
06461-10-3102X40	orange RAL 2004	plastic-coated	3	M10	30	47	33,9	64,4	68,6	80	95	11,2	40	on request
06461-10-3102X50	orange RAL 2004	plastic-coated	3	M10	30	47	33,9	64,4	68,6	80	95	11,2	50	on request
06461-10-4102X20	orange RAL 2004	plastic-coated	4	M10	30	53,1	37,2	72,8	77,3	95	110	13,2	20	on request
06461-10-4102X30	orange RAL 2004	plastic-coated	4	M10	30	53,1	37,2	72,8	77,3	95	110	13,2	30	on request
06461-10-4102X40	orange RAL 2004	plastic-coated	4	M10	30	53,1	37,2	72,8	77,3	95	110	13,2	40	on request
06461-10-4102X50	orange RAL 2004	plastic-coated	4	M10	30	53,1	37,2	72,8	77,3	95	110	13,2	50	on request
06461-10-5122X20	orange RAL 2004	plastic-coated	5	M12	35	59,1	41,9	83	87,5	110	127,5	15,4	20	on request
06461-10-5122X30	orange RAL 2004	plastic-coated	5	M12	35	59,1	41,9	83	87,5	110	127,5	15,4	30	on request
06461-10-5122X40	orange RAL 2004	plastic-coated	5	M12	35	59,1	41,9	83	87,5	110	127,5	15,4	40	on request
06461-10-5122X50	orange RAL 2004	plastic-coated	5	M12	35	59,1	41,9	83	87,5	110	127,5	15,4	50	on request
06461-10-20827X10	ruby red RAL3003	plastic-coated	2	M8	25	38,5	27,7	52,6	55,6	65	77,5	10	10	on request
06461-10-20827X20	ruby red RAL3003	plastic-coated	2	M8	25	38,5	27,7	52,6	55,6	65	77,5	10	20	on request
06461-10-20827X30	ruby red RAL3003	plastic-coated	2	M8	25	38,5	27,7	52,6	55,6	65	77,5	10	30	on request
06461-10-20827X40	ruby red RAL3003	plastic-coated	2	M8	25	38,5	27,7	52,6	55,6	65	77,5	10	40	on request
06461-10-31027X15	ruby red RAL3003	plastic-coated	3	M10	30	47	33,9	64,4	68,6	80	95	11,2	15	on request
06461-10-31027X30	ruby red RAL3003	plastic-coated	3	M10	30	47	33,9	64,4	68,6	80	95	11,2	30	on request
06461-10-31027X40	ruby red RAL3003	plastic-coated	3	M10	30	47	33,9	64,4	68,6	80	95	11,2	40	on request
06461-10-31027X50	ruby red RAL3003	plastic-coated	3	M10	30	47	33,9	64,4	68,6	80	95	11,2	50	on request
06461-10-41027X20	ruby red RAL3003	plastic-coated	4	M10	30	53,1	37,2	72,8	77,3	95	110	13,2	20	on request
06461-10-41027X30	ruby red RAL3003	plastic-coated	4	M10	30	53,1	37,2	72,8	77,3	95	110	13,2	30	on request
06461-10-41027X40	ruby red RAL3003	plastic-coated	4	M10	30	53,1	37,2	72,8	77,3	95	110	13,2	40	on request
06461-10-41027X50	ruby red RAL3003	plastic-coated	4	M10	30	53,1	37,2	72,8	77,3	95	110	13,2	50	on request
06461-10-51227X20	ruby red RAL3003	plastic-coated	5	M12	35	59,1	41,9	83	87,5	110	127,5	15,4	20	on request
06461-10-51227X30	ruby red RAL3003	plastic-coated	5	M12	35	59,1	41,9	83	87,5	110	127,5	15,4	30	on request
06461-10-51227X40	ruby red RAL3003	plastic-coated	5	M12	35	59,1	41,9	83	87,5	110	127,5	15,4	40	on request
06461-10-51227X50	ruby red RAL3003	plastic-coated	5	M12	35	59,1	41,9	83	87,5	110	127,5	15,4	50	on request
06461-10-2083X10	silver metallic	plastic-coated	2	M8	25	38,5	27,7	52,6	55,6	65	77,5	10	10	on request
06461-10-2083X20	silver metallic	plastic-coated	2	M8	25	38,5	27,7	52,6	55,6	65	77,5	10	20	on request
06461-10-2083X30	silver metallic	plastic-coated	2	M8	25	38,5	27,7	52,6	55,6	65	77,5	10	30	on request
06461-10-2083X40	silver metallic	plastic-coated	2	M8	25	38,5	27,7	52,6	55,6	65	77,5	10	40	on request
06461-10-3103X15	silver metallic	plastic-coated	3	M10	30	47	33,9	64,4	68,6	80	95	11,2	15	on request
06461-10-3103X30	silver metallic	plastic-coated	3	M10	30	47	33,9	64,4	68,6	80	95	11,2	30	on request
06461-10-3103X40	silver metallic	plastic-coated	3	M10	30	47	33,9	64,4	68,6	80	95	11,2	40	on request
06461-10-3103X50	silver metallic	plastic-coated	3	M10	30	47	33,9	64,4	68,6	80	95	11,2	50	on request
06461-10-4103X20	silver metallic	plastic-coated	4	M10	30	53,1	37,2	72,8	77,3	95	110	13,2	20	on request
06461-10-4103X30	silver metallic	plastic-coated	4	M10	30	53,1	37,2	72,8	77,3	95	110	13,2	30	on request
06461-10-4103X40	silver metallic	plastic-coated	4	M10	30	53,1	37,2	72,8	77,3	95	110	13,2	40	on request
06461-10-4103X50	silver metallic	plastic-coated	4	M10	30	53,1	37,2	72,8	77,3	95	110	13,2	50	on request
06461-10-5123X20	silver metallic	plastic-coated	5	M12	35	59,1	41,9	83	87,5	110	127,5	15,4	20	on request
06461-10-5123X30	silver metallic	plastic-coated	5	M12	35	59,1	41,9	83	87,5	110	127,5	15,4	30	on request
06461-10-5123X40	silver metallic	plastic-coated	5	M12	35	59,1	41,9	83	87,5	110	127,5	15,4	40	on request
06461-10-5123X50	silver metallic	plastic-coated	5	M12	35	59,1	41,9	83	87,5	110	127,5	15,4	50	on request