Wedge clamps machinable

go back

Products
- Product overview
  - Flexible standard component system
    - Clamp straps Clamping devices
      - Clamping jaws Edge clamps Tension nuts and screws
        Wedge clamps machinable

Item description/product images

DescriptionMaterial:Body tool steel.
Jaw segments tool steel (30 HRC).Version:Body hardened.
Jaw segments black oxidised.
Wedge faces ground.Note:The special feature of the wedge clamp lies in the machining allowance per vice jaw of 3 mm for version 04526-08 and 5 mm for versions 04526-12 and 04526-16.
This extra length allows for forms adjusted to the workpiece geometry to be incorporated (see illustration).

Vice jaws version 04526-08 and 04526-0810 are not serrated.

Travel acc. to order No.:
04526-08 = ±0.5 mm
04526-12 = ±1.0 mm
04526-16 = ±1.5 mmOn request:Pre-formed jaw segments or other hardness grades.Drawing reference:

D) DIN 912 cap screw

1) wedge clamps
2) workpiece
3) fixed stop
4) base plate
5) hydraulic/pneumatic cylinder

DownloadHere is all the information as a PDF datasheet:

Are you looking for CAD data? These can be found directly in the product table.

Datasheet 04526 Wedge clamps machinable

250 kB

Drawings

Item selection/filter

Order No.	A min.	A max.	B	B1	C	D	E	Version 2	G	Clamping force max. kN	Tightening torque max. Nm	Price
04526-08	33	37	29	21	15	M8X25	2,5	for tapped hole	M8	15	25	on request
04526-0810	33	37	29	21	15	M8X25	2,5	for t-slot	10	15	25	on request
04526-12	52	59	41	30	22	M12X40	4	for tapped hole	M12	30	85	on request
04526-1214	52	59	41	30	22	M12X30	4	for t-slot	14	30	85	on request
04526-16	67	76	56	42	29	M16X60	5	for tapped hole	M16	50	210	on request
04526-1618	67	76	56	42	29	M16X50	5	for t-slot	18	50	210	on request